A 2018 HomeAdvisor survey found that homeowners underestimated the cost of fixing or updating just about everything in their homes. When it came to interior painting, for example, survey participants estimated the work would cost $734. But the national average is $1,744. One of the few items they overestimated was a new toilet — the average is $370, not $405.
PWC provides critical – not cosmetic – home repair services to its clients. This type of home maintenance is performed by PWC’s trained, licensed and bonded staff of skilled tradesmen, including plumbers, electricians, carpenters, and HVAC technicians. Depending on your location and your specific needs, below are some of the services you could receive:
Ms. Artale in Westchester has a plan to fix the problem. Neither she nor her husband, Andy, 41, a program analyst, may ever learn how to repair a fence. But that won’t be the case with their 9-year-old son, Matteo. “When my son gets a little older, I’m going to apprentice him out to someone — for real,” she said. “It’s ridiculous that my husband and I don’t know how to do anything.”
How to DIY it: There are lots of ways to clear a drain, so start with the easiest one. If your sink has a pop-up stopper, remove that and clean it. If that doesn’t do the trick, fill the sink with 3 or 4 inches of water and use a plunger to plunge the sink (plug the overflow hole with a wet rag first). Still slow? Try snaking the drain pipe with a metal hanger or a pipe-cleaning tool (sold at hardware stores for about $2).

Silicone dries quickly and invisibly and doesn’t attract dirt, making it a good lubricant for drawer rollers, window tracks, door locks, bike parts, and other plastic, metal and rubber surfaces. It also helps protect metal against rust. Lithium grease is a long-lasting, weather-resistant (though somewhat messy) lubricant for garage door tracks, car doors and latches, and other metal parts that get heavy use outside. Check out 20 brilliant ways to use WD-40, another must-have lubricant for home repairs.


If you have a wallpaper seam that’s coming apart, reactivate the paste around the gap with a rag soaked in warm water. Hold the rag over the area for a minute or two, and then carefully open the gap a little larger so you’ll have more room for the sealer. Squeeze seam sealer (white glue works in a pinch) into the gap, and press the paper to the wall with a roller. Clean off the excess sealer with a sponge.
If you find that drawer slides are bent, rollers are broken or rollers won’t turn even after lubricating, replacement is the best solution. To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new. Remove a drawer track and a cabinet track and take them shopping with you. Learn how to build an under-cabinet drawer here.
The average single-family homeowner spends around $2,000 a year on maintenance, according to Bankrate.com. That is considerably less than the monthly fees for most condos or co-ops. But even though the monthly outlay for those homeowners might be lower than that of condo or co-op owners, house owners generally are not squirreling away those savings for a rainy day. Nearly half of them have less than $1,000 saved, and a third have nothing saved, according to Liberty Mutual Insurance. So when that sump pump suddenly fails, odds are, we’re scrambling to pay the plumber for a new one.
In theory, the cost of building-wide improvements should be less in a condo because it is spread out across dozens of residents, and the sheer scale of the project could lower the overall price. But it does not always work out that way. Condo board members are volunteers who may not be skilled negotiators or knowledgeable about construction. They may take the first bid they get, or agree to more work than is necessary. If complications increase the cost of the job, residents won’t necessarily know. “This is one of the potential downsides of a condo or co-op scheme,” said Eric D. Sherman, a real estate lawyer and partner in the New York office of Pryor Cashman. “Lots of the time, boards are under the gun. They’re not paid for their efforts, they take the first bid from the first contractor that they see and they say, ‘sign me up.’”
Simple fixes for the four most common refrigerator problems: an ice-maker breakdown, water leaking onto the floor, a cooling failure and too much noise. Chances are, you can solve the problem yourself, save some money and avoid the expense and inconvenience of a service appointment. The following article will walk you through the simplest solutions to the most common fridge malfunctions. Learn how to repair a refrigerator here.
An estimate was that in 2003, the market for home-maintenance and repair spending was up 14% from 2001 to 2003.[12] Another estimate was that the market in the United States was $126 billion and was increasing by about 4% annually.[10] American homes are aging; one estimate was that in 2007, more than half of all homes are older than 25 years.[12] And, as populations worldwide tend to become older, on average, and since increasingly elderly people will be less inclined and able to maintain their homes, it is likely that demand for handyman services will grow.[original research?][citation needed]
Everyone has a different skill set, and not everyone was put on this planet with the same aptitude for manual labor. And that’s okay! Whatever your needs, the Handy platform can connect you with the right professionals who won’t be daunted by your task, whatever it might be. Whether you need help with a door that won’t close, a squeaky hinge, drywall repair, or fixing a broken table leg, we’ve got you covered.  You can’t go wrong with Handy—let us connect you with a top-rated handyman with the right skills for your job.
Tired of listening to those cabinet doors bang shut? Peel-and-stick door and drawer bumpers are the solution. Get a pack of 20 at a home center for a few dollars. Make sure the back of the door is clean so the bumpers will stick, then place one at the top corner and another at the bottom. Plus: Keep your kitchen (and whole house!) clean with these 100 brilliant cleaning hacks.
The experienced, skilled carpenters and tradesfolk at Neil Kelly bring their “get it done” attitudes to all of your home repair, replacement and refinishing jobs. From small repairs to large, complex projects, our Handyman pros have the expertise and resources to get your job done right, and the outstanding professionalism, thoroughness and craftsmanship that you expect of Neil Kelly. TALK TO A SPECIALIST >
Hello my name is Leo and about 22 years ago I entered the world of construction. Throughout the years I have learned many skills and I have used my skills to help people accomplish their projects. I am a father of 4 and family time is very important to me. My family and I started our own community garden where we teach other children how to grow their own garden.
How to DIY it: Clean up any rough edges around the hole, then stick the patch onto the wall over the hole (left). Using the taping knife, spread a layer of joint compound over it and let it dry overnight. Then spread a wider second coat, feathering out the compound on all sides to make the patch blend in. Let it dry, then apply one more coat extending 8 to 12 inches beyond the patch in 
all directions. After the final coat dries, sand the area with a sanding sponge (a foam block wrapped in sand­paper) until it feels smooth and even. Prime, and then paint.
To fix a squeaky floor under carpet, locate the floor joists with a stud finder, then drive in a trim head screw through the carpet, pad and subfloor, and right into the floor joist. Be sure the top inch of the screw doesn’t have threads or the subfloor won’t suck down tight to the joist. We like trim screws because screws with larger heads pull down and pucker the carpet. If that happens, back out the screw and drive it back down. Keep adding screws until the squeak stops. Try these other squeaky floor fixes.
Though it can seem intimidating, installing your own batting installation can be easy, and take just a few hours if you isolate the need to a few key spaces. Have a drafty attic? Start there. Concerned about a freezing crawl space? Throw on your work jeans and get to work. These insulating spaces will instantly feel warmer and you’ll notice the savings on your next heating bill. Read how to install insulation here.
When you use the Handy app or website, you’ll be connected with local handyman professionals who can take care of this work for you. In addition to freeing up your time for the more important things in life, booking a handyman through the Handy platform will give you the security of knowing that things are being handled by an expert. If the sight of a hammer or screwdriver fills you with anxiety and you’d rather leave things to a professional, the Handy platform is ready to help.
Plumbing vent boots can be all plastic, plastic and metal, or even two-piece metal units. Check plastic bases for cracks and metal bases for broken seams. Then examine the rubber boot surrounding the pipe. That can be rotted away or torn, allowing water to work its way into the house along the pipe. With any of these problems, you should buy a new vent boot to replace the old one. But if the nails at the base are missing or pulled free and the boot is in good shape, replace them with the rubber-washered screws used for metal roofing systems. You’ll find them at any home center with the rest of the screws. You’ll have to work neighboring shingles free on both sides. If you don’t have extra shingles, be careful when you remove shingles so they can be reused. Use a flat bar to separate the sealant between the layers. Then you’ll be able to drive the flat bar under the nail heads to pop out the nails.
×