Live in a condo or co-op in the city, and your monthly maintenance fee may be large enough to make you envy the owner of a single-family home. But that regular common charge means that you get to live in ignorant bliss about what it costs to keep a property functioning. You may never know when the gutters get cleaned, who gets hired to do the work or even how much the job costs. None of the details are your problem because the work just gets done whether you’re paying attention or not.

This is a fun one. Composite wood paneling may have been all the rage in the 60s and 70s, but unless it’s still in perfect condition and painted white, it’s probably an eyesore. Popping off this decorative paneling can take minutes, and is seriously satisfying. Just be ready: you never know what condition the wall is in underneath. Be prepared to do a little plaster repair and, of course, repaint. Click here to learn how to prepare a wall for painting.

Sooner or later, every sprayed ceiling is going to get a water stain or a scrape. Spray texture in a can won’t perfectly match every ceiling texture, but it’s usually close, and a lot easier than respraying a whole ceiling. Before spraying, seal the patch with a stain-blocking primer, cover the floor and furniture, and practice your technique on scrap plywood or cardboard. Buy ceiling texture on Amazon now.
Simple fixes for the four most common refrigerator problems: an ice-maker breakdown, water leaking onto the floor, a cooling failure and too much noise. Chances are, you can solve the problem yourself, save some money and avoid the expense and inconvenience of a service appointment. The following article will walk you through the simplest solutions to the most common fridge malfunctions. Learn how to repair a refrigerator here.
There’s nothing worse than starting a sink or toilet repair only to find that the shutoff valve won’t shut off. Some shutoff valves are easy to replace. For those that aren’t, turn off the main water valve, remove the packing nut, and then unscrew the stem and take it to the hardware store to find a replacement washer. Clean any grit out of the valve body and pop on the new washer. The valve will work like new.
This is a fun one. Composite wood paneling may have been all the rage in the 60s and 70s, but unless it’s still in perfect condition and painted white, it’s probably an eyesore. Popping off this decorative paneling can take minutes, and is seriously satisfying. Just be ready: you never know what condition the wall is in underneath. Be prepared to do a little plaster repair and, of course, repaint. Click here to learn how to prepare a wall for painting.

Though it can seem intimidating, installing your own batting installation can be easy, and take just a few hours if you isolate the need to a few key spaces. Have a drafty attic? Start there. Concerned about a freezing crawl space? Throw on your work jeans and get to work. These insulating spaces will instantly feel warmer and you’ll notice the savings on your next heating bill. Read how to install insulation here.


Many people can do common household repairs. There are resources on the Internet, as well as do-it-yourself guide books,[8] with instructions about how to complete a wide range of projects. Sometimes the fix-it skill is seen as genetic, and people lacking such skills are said to "lack the handy-man gene".[9] One trend is that fewer homeowners are inclined to do fix-up jobs, perhaps because of time constraints, perhaps because of lack of interest; one reporter commented "my family's fix-it gene petered out before it reached my generation."[10]
With Grandma’s handymen in Aurora, Parker, Highlands Ranch and Denver, handyman help is just a phone call away! Our Denver handyman staff specializes in home maintenance and repair, and is experienced in a variety of trades including plumbing, painting, drywall, electrical, and carpentry. Click here for a list of our handyman services in Aurora, Denver, Parker, Highlands Ranch, Lone Tree, Centennial, Littleton, Lakewood, and Englewood.

You may qualify if all of the following apply to your household:A child under six resides in your home or spends at least six hours per week in your home on a regular basis You have owned and lived in your home for more than one yearYour home was built before 1978You live in one of these city neighborhoods:Bond Hill, Westend, Over-The-Rhine, Mt. Auburn, CUF, Corryville, Madisonville, Avondale, South Cumminsville, North and South Fairmount, West, East and Lower Price Hill, Walnut Hills, Evanston Northside or Carthage
Habitat for Humanity of Pinellas County is excited to offer a home repair program available for eligible Pinellas County residents! If you are a Pinellas County homeowner and in need of non-emergency home repairs, you may qualify for Habitat for Humanity of Pinellas County Neighborhood Revitalization Program. The program is designed to offer homeowners home repairs in four essential repair categories: “Aging in Place” Modifications (ramps or accessibility upgrades designed to accommodate physical mobility limitations), Critical Home Repairs (roof replacement, plumbing, electric, structural repairs) Energy Efficiency Upgrades (insulation, HVAC) and Exterior Enhancements (paint, landscaping). Eligible homeowners will be provided a zero-percent interest loan to cover the cost of repairs, while the loan payment will be tailored to ensure affordability. Please see Home Repair FAQs & How to Apply Section for additional information.   
Any property repair services are only as good as the people and the tools behind them. That’s why we use only the latest repair and maintenance equipment on every job, no matter how small. Part of our job is to ensure your house is up-to-date and looking its best, so we use only the best resources available in order to make that happen. We offer a variety of handyman services throughout the DC area, including all of the following:
When that happens, all you can do is pay up, as happened with Jason Hark and Kenneth Larivee. In 2016, the couple got hit with a $28,000 assessment to replace the siding on their West Orange, N.J. townhouse in a condo association. This cost came on top of their $610 monthly association fee. After speaking with siding companies, Mr. Hark estimated that if his unit had been a stand-alone property, the project would have cost closer to $7,500. “But we couldn’t fight it,” said Mr. Hark, a director at WCBS-TV.
Business Education Entertainment Government President Obama Visit 2009 General Election Health Live Healthy Non-Profit Sports Obituaries Pet Network Homeless Taskforce Weather Amherst Avon Avon Lake Elyria Grafton LaGrange Lorain North Ridgeville Oberlin Sheffield Lake Sheffield Village Vermilion Wellington LorainCounty.com Blog Digital Partners Advertise with Us
Depending on where you live, national averages can seem like a steal. Rene Artale’s four-bedroom house near Newcastle, in Westchester County, N.Y., suffered some damage during a storm last winter. A tree fell in the yard, damaging her fence, arbor and retaining wall. And heavy snow caused her roof to leak. The repair bills just kept piling up. Removing the tree, $3,800. Repairing the wall, $4,000. Fixing the roof, $3,800. Fixing the picket fence, $2,800. “It’s obscene,” Ms. Artale, 47, said.
When that happens, all you can do is pay up, as happened with Jason Hark and Kenneth Larivee. In 2016, the couple got hit with a $28,000 assessment to replace the siding on their West Orange, N.J. townhouse in a condo association. This cost came on top of their $610 monthly association fee. After speaking with siding companies, Mr. Hark estimated that if his unit had been a stand-alone property, the project would have cost closer to $7,500. “But we couldn’t fight it,” said Mr. Hark, a director at WCBS-TV.
You'll get an email from your pro to confirm the date, time, and other details. Please be prepared to provide your pro the exact list of projects you would like them to complete and, wherever possible, related product URLs. During appointment scheduling, you will have the option to allow the provider to contact you to discuss the projects and tools needed in more detail.

Don’t let your toilet be a mysterious device in the corner of your bathroom: Toilets actually operate by very simple mechanisms that are easy to understand. The majority of toilet issues—clogs, continuous running water, loud noises, etc.—can be solved with the quick purchase of a replacement part and some tinkering in the tank. Don’t be afraid to open it up and take a look. Also note: These are the things you should never, ever flush down a toilet


How to DIY it: Turn it off by opening the disconnect box (typically located on the outside wall near the unit) and pulling out the disconnect block inside (above). Now take a good look at the unit. If the vents are caked with fuzz from dandelions or cottonwood trees, vacuum the vents. Then rinse the unit with a hose using moderate pressure (the flimsy fins might bend under strong pressure). As you spray, peer down into the unit. You should see water streaming through. If not, the fins are still clogged, so keep rinsing.
Dab any type of kitchen cooking oil (olive, canola or sunflower) onto a paper towel. Then lay the paper towel over the residue that refuses to budge. Wait a few minutes while the oil works to dissolve the stubborn glue. Finally, remove the towel and rub away the sticker residue with another clean paper towel. However, you need to be cautious with stains on more absorbent materials.
Other competitors include online referral services.[10] In addition, some large home centers offer installation services for products such as cabinets and carpet installation.[16] Sometimes homeowners contact a professional service after trying, but failing, to do repair work themselves; in one instance, a Minneapolis homeowner attempted a project but called a technician to finish the project, and the overall cost was substantial.[19]
When you use the Handy app or website, you’ll be connected with local handyman professionals who can take care of this work for you. In addition to freeing up your time for the more important things in life, booking a handyman through the Handy platform will give you the security of knowing that things are being handled by an expert. If the sight of a hammer or screwdriver fills you with anxiety and you’d rather leave things to a professional, the Handy platform is ready to help.

I'm a do it all kind of guy, from Full remodels, Kitchen, Bathrooms. Granite counter tops, Installation of RO Water Filtration system, coring Granite, Marble, Mounting TV's will full cable concealment, Electrical deadbolts, Nest, Echobee thermostats, Refininsh Hardwood floors, Garbage disposal Installs, faucets, toilets, electrical toilet seats, recessed lights, Drywall, sheetrock, mudding, you name it I can do it. Im also a painter, my quality of work is exceptional, Exterior, interior, textures, crown molding, baseboards. I provide all tools and supplies necessary, sprayers, rollers, brushes, drop clothes, If there is something not on this list just message me and I'll let you know. Im genuine and I truly care about building long term business relationships.
If you can’t see any telltale flow marks, and since the stain is fairly small, look at the underside of the roof for ‘shiners.’ A shiner is a nail that missed the framing member, in this case when the carpenter nailed the roof sheathing to the rafters. Moisture that escapes into the cold attic from the rooms below often condenses on cold nails. Sometimes you can spot this if you climb up into your attic on a cold night. The nails will look white because they’re frosted. When the attic heats up a bit during the day, the frost melts and drips, then the nails frost up at night again and so on. The solution is to simply clip the nail with a side-cutting pliers.
If you have a wallpaper seam that’s coming apart, reactivate the paste around the gap with a rag soaked in warm water. Hold the rag over the area for a minute or two, and then carefully open the gap a little larger so you’ll have more room for the sealer. Squeeze seam sealer (white glue works in a pinch) into the gap, and press the paper to the wall with a roller. Clean off the excess sealer with a sponge.
From the beginning these guys were great. I received a text message asking me for all of the work I would like to be done. I initially only needed the service to mount my over the range microwave but because of his swift service, I was able to install floating shelves and a wine rack. There was communication all throughout the process and I loved how honest they were when they weren't 100% sure if they could do my microwave. Other than that, my son loved the handyman and walked around the apartment with our measuring tape telling me how may units things were. Loved the service and will definitely book again!
If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch. Or, try using a walnut to remove scratches in wood!
How to DIY it: Gently tug the loose part of the carpet to find the point where it’s still attached. Snip 
it off as close to the backing as possible and save it. Use painter’s tape to surround the repair area. Squeeze 
a heavy bead of carpet seam sealer (about $6 at home centers) into the run. Then fill in the hole with the saved fiber, using a screwdriver to press it into the sealer bit by bit until the area looks like the surrounding 
carpet (below).
Risk: If your house was built 
before 1994 and still has the original plumbing fixtures, you’re using 
30 to 40 percent more water than 
a comparable new home. Because about 70 percent of the water flowing through the showerhead is hot, 
that means higher heating bills too. A basic showerhead can cost just $15 and could pay for itself in reduced water and heating costs after just one month. Calculate your 
savings at epa.gov/watersense/watersense-calculator.
Simple fixes for the four most common refrigerator problems: an ice-maker breakdown, water leaking onto the floor, a cooling failure and too much noise. Chances are, you can solve the problem yourself, save some money and avoid the expense and inconvenience of a service appointment. The following article will walk you through the simplest solutions to the most common fridge malfunctions. Learn how to repair a refrigerator here.
Upholstery shops charge almost $200 to fix tears in your seats. You can do it yourself in a few hours with a vinyl and leather repair kit (less than $20) from any auto parts store. You’ll have to practice a bit to get the right color mix and it might not be a perfect match when you’re done, but it’s a heck of a lot better than driving around with torn seats. Start by gluing reinforcing fabric onto the underside of the torn vinyl or leather. Then mix the heat-set filler to match your fabric color and apply it to the tear. Next, find a textured mat that most closely resembles the texture of your vinyl or leather and place it onto the liquid filler. Heat the patching tool with a clothes iron and press it onto the textured mat. Remove the patching tool, but leave the textured mat in place until the patch cools. Then peel it off. Get the full story on repairing leather here.
This is a fun one. Composite wood paneling may have been all the rage in the 60s and 70s, but unless it’s still in perfect condition and painted white, it’s probably an eyesore. Popping off this decorative paneling can take minutes, and is seriously satisfying. Just be ready: you never know what condition the wall is in underneath. Be prepared to do a little plaster repair and, of course, repaint. Click here to learn how to prepare a wall for painting.
×